Ultibots Kossel 250 Build SOLD
Posted: Wed Jan 06, 2016 9:32 am
Up for sale is my Ultibots Kossel 250. I have owned this printer for 5 months but it is now time for me to build something else. The printer has a 240mm cylindrical x 235mm peak height. I will be including any spare hardware that I can find for the printer as well. Below are some specs of what is on the printer. Asking 585 shipped. Any questions feel free to ask.(filament not included in the picture)
• Black V-Slot 2020 Aluminum Extrusions - 700mm (x3)
• Black V-Slot 2020 Aluminum Extrusions - 360mm (x9)
• MagBall Arms Ends (x6)
• FSR Kit installed (autoleveling enabled)
• J-Head 1.75mm Hotend
• Kapton heater - 240mm
• Aluminum Heat Spreader - 250mm
• Borofloat Borosilicate Glass - 250mm
• eMinebea PG35L Micro Extruder Motor (x1)
• Kysan NEMA 17 Stepper Motors (x3)
• Ramps 1.4, Mega2560, A4988 Drivers
• 2004 LCD Controller
• Power Supply
• GT2 Belts - Open Ended
• McMaster/Fastenal Stainless Steel Hardware
• Black ABS Printed Parts
• Misumi T Nuts
• Black V-Slot 2020 Aluminum Extrusions - 700mm (x3)
• Black V-Slot 2020 Aluminum Extrusions - 360mm (x9)
• MagBall Arms Ends (x6)
• FSR Kit installed (autoleveling enabled)
• J-Head 1.75mm Hotend
• Kapton heater - 240mm
• Aluminum Heat Spreader - 250mm
• Borofloat Borosilicate Glass - 250mm
• eMinebea PG35L Micro Extruder Motor (x1)
• Kysan NEMA 17 Stepper Motors (x3)
• Ramps 1.4, Mega2560, A4988 Drivers
• 2004 LCD Controller
• Power Supply
• GT2 Belts - Open Ended
• McMaster/Fastenal Stainless Steel Hardware
• Black ABS Printed Parts
• Misumi T Nuts