Welcome to the SeeMeCNC Community

Greetings! My name is Dave and I am a newbie to the world of 3-D printing. I have seen and read a lot about them lately and have been wanting one for a while. So, after seeing SeeMeCNC this past weekend at Maker Faire, NY the wife and I decided to order the Rostock Max v2 kit. I am totally excited for the kit to arrive; however, after looking through the manual I feel a bit trepidatious about the whole endeavor.

I am a software engineer by trade with a very "minor" in prop building.

Hi and welcome to the forum!
Trepidation is felt by a lot of builders but as long as you follow the manual step by step
you should have little problems. If problems are encountered you can always contact SeeMeCNC
directly or ask your question on this forum. We will be glad to help you out.
Have a happy build!