Welcome to the SeeMeCNC Community

Proud owner of a Rostock Max V2, Just got it assembled and installed the Firmware. I have a question I am a noob with arduino, I have the different stepper motors that the normal firm ware is set for in the manual it tells me to change those values but having some trouble, I have found the configuration.h file and opened it but... everything is one mass of information, I know it's just something I am missing but if someone could point me in the right direction I would appreciate it.

Never mind guys I found what I needed somewhere else.
Thanks,http://forum.seemecnc.com/posting.php?m ... =2&p=75155#
Bill

Welcome to the forum and thanks for your purchase of the Rostock Max V2.
I am glad that you figured out the problem yourself but remember that we are here to help with future problems.
Happy Printing!