Filament Tests
Posted: Sun Jul 12, 2015 8:49 pm
Hi, I haven't seen this posted here on the forum http://my3dmatter.com/ but I believe it's an interesting read for those that are interested in different filaments, and how infills and layer heights can affect print quality.
Just 1 note on the dutch filament of the first test, from what I gathered by talking with dutchfilaments.com they have never supplied reprapworld, so given that reprapworld confirmed to me that their current REAL filament line is the same filament that they used to call Dutch filament, it seems to me that the filament tested is produced by real-filament.com, which is also a Dutch company.
Just 1 note on the dutch filament of the first test, from what I gathered by talking with dutchfilaments.com they have never supplied reprapworld, so given that reprapworld confirmed to me that their current REAL filament line is the same filament that they used to call Dutch filament, it seems to me that the filament tested is produced by real-filament.com, which is also a Dutch company.