Welcome to the SeeMeCNC Community

Having a bit of a problem

http://www.lasivian.com/coppermine/disp ... p?pid=3833
[img]http://www.lasivian.com/coppermine/albu ... G_0026.JPG[/img]

Already up to 210c for PLA and increased my E-steps more than 20%. Only running at 30mm/s

Running a fan? Could you post your settings?

I actually made some progress.

The perimeters have always looked great, and layers without retraction. So I shut off retraction and got nearly perfect fill but lots of strings.

Trying to split the difference.

Right now i am at

Esteps: 120
Temp: 210 (PLA)
Retraction length: 2mm

We'll see how that goes.