Welcome to the SeeMeCNC Community

Does anyone know how to configure KISSlicer in order to create straight edges?

Slic3r is able to produce straight corners with the same STL file, which makes me think KISSlicer is doing something differently.

[img]http://i.imgur.com/cBIE2h1.png[/img]

[img]http://i.imgur.com/DafnNT9l.jpg[/img]

Switching to Cura produced better gcode, nearly perfect.

good to know.!

I think if you turn jitter down, that'll eliminate the random start point for each layer, which is the reason for the jagged edges. I've only played with kisslicer for a day, but that's what has worked for me.