HE 280 acceleromteter failed?
Posted: Fri Mar 26, 2021 12:49 pm
Wondering if my accelerometer might've got zapped with a static discharge and cooked (unfortunately our house gets quite dry in the winter and static is a major issue). Suddenly getting errors in the console:
09:35:34.323 : iis2dh accelerometer initializing...
09:35:34.340 : accelerometer i2c recv failed.
And if I try a calibration, it smacks the extruder into the build glass reasonably hard (gouged a chip out in one corner, fortunately could rotate the glass out of the way).
Any options to diagnose, or just need to replace? Did try re-seating the cable and no-dice. Guess I could just re-order the board and try swapping it (and some new glass too).
09:35:34.323 : iis2dh accelerometer initializing...
09:35:34.340 : accelerometer i2c recv failed.
And if I try a calibration, it smacks the extruder into the build glass reasonably hard (gouged a chip out in one corner, fortunately could rotate the glass out of the way).
Any options to diagnose, or just need to replace? Did try re-seating the cable and no-dice. Guess I could just re-order the board and try swapping it (and some new glass too).