Parts undersize in both X & Y directions

Having a problem? Post it here and someone will be along shortly to help
Post Reply
redtank
Printmaster!
Posts: 53
Joined: Sat Jan 31, 2015 8:06 pm

Parts undersize in both X & Y directions

Post by redtank »

Hello,
Have a Max V2 for over two years, great machine. I'm having to rescale prints from 1.0 to 1.063 in both X & Y directions to get print close to .stl model in size. What can I do to correct for this condition to eliminate rescaling? Z dimensions are within a few thou. I'll re-flash the firmware if need be. I'm using Simplify3D for slicing.

Thanks,
Cris
Top
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:
Contact mhackney

Re: Parts undersize in both X & Y directions

Post by mhackney »

http://forum.seemecnc.com/viewtopic.php ... it=scaling

No recompiling or flashing necessary.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts

The Eclectic Angler
Top
Post Reply

Return to “Troubleshooting”