Re: Rostock Max V2 Shutting Down on Heatup UPDATE
Posted: Sun Jan 11, 2015 10:14 pm
Much respect! Your tip got me printing right away. Otherwise who knows when i would have been able to start.nitewatchman wrote:It's what I do.
Welcome to the SeeMeCNC Community
Have a look around and join today!
https://images.seemecnc.com/
Rostock Max V2 Shutting Down on Heatup UPDATE
Page 3 of 3
Re: Rostock Max V2 Shutting Down on Heatup UPDATE
Posted: Tue Jan 13, 2015 1:47 pm
Getting ready to try this now, glad I found it. I was printing an Onyx bed leveling aid and 2 partially protected wires to my led ring bridged themselves on the bed clip. I'm hoping that it's just a blown fuse , we'll see...nitewatchman wrote:Static,
Sucks not to have fuses, these are really difficult to find locally.
A practical work around, UNTIL YOU CAN GET THE CORRECT NANO FUSES, is to solder the blades of an automotive fuse (like the 15A that protects the Heated Bed) to the ends of the blown Nano fuse placing the automotive fuse in parallel to the blown fuse. Not pretty but it works and still protects the Rambo circuits.
At least that is what I would do. Worst case is that you would screw up the blown fuse.
Re: Rostock Max V2 Shutting Down on Heatup UPDATE
Posted: Sat Jan 17, 2015 7:29 pm
Heh. Gotta do what you gotta do.
Last night the connection on my parts fan shorted and I blew a nano fuse. I just went the easy way. It's a temporary/permanent solution (I don't feel like tracking down nano fuses). I ended up throwing in a reset-able 5A breaker. If it doesn't do the trick or act quick enough in the event of a short and roasts my Rambo, then it'll be a good excuse to move to a smoothie or something else.
Last night the connection on my parts fan shorted and I blew a nano fuse. I just went the easy way. It's a temporary/permanent solution (I don't feel like tracking down nano fuses). I ended up throwing in a reset-able 5A breaker. If it doesn't do the trick or act quick enough in the event of a short and roasts my Rambo, then it'll be a good excuse to move to a smoothie or something else.
- Up and running!