Page 2 of 2
Re: Owl Facing Left 2.4x scale
Posted: Thu Jan 09, 2014 10:09 pm
by int2str
My version of the Owl
- 23cm; about the largest you can print with the ORION
- 0.3333mm layer height; 0.4mm nozzle
- ABS; E3D 235C, bed 100C
- No fan(s) other than E3D fan
- 10 hour total print time
- Bed prep: Elmers glue on glass
Re: Owl Facing Left 2.4x scale
Posted: Thu Jan 09, 2014 11:20 pm
by bvandiepenbos
hey Eaglezsoar
yes, I have printed that owl a few times at 9" tall hollow (0 infill) worked great.
I used 3 perimeters and 4 top & bottom layers.
.2 layers
I used ABS, Steve cheated and used PLA and infill (wink, wink)
KISSlicer
Re: Owl Facing Left 2.4x scale
Posted: Thu Jan 09, 2014 11:47 pm
by Eaglezsoar
bvandiepenbos wrote:hey Eaglezsoar
yes, I have printed that owl a few times at 9" tall hollow (0 infill) worked great.
I used 3 perimeters and 4 top & bottom layers.
.2 layers
I used ABS, Steve cheated and used PLA and infill (wink, wink)
KISSlicer
That's great to know! And thanks for answering without being condescending like one answer I received.
I just don't see the sense in infill for a statue that just sits there, I'm glad that it can be done hollow.
Re: Owl Facing Left 2.4x scale
Posted: Thu Jan 09, 2014 11:49 pm
by Eaglezsoar
int2str wrote:My version of the Owl
- 23cm; about the largest you can print with the ORION
- 0.3333mm layer height; 0.4mm nozzle
- ABS; E3D 235C, bed 100C
- No fan(s) other than E3D fan
- 10 hour total print time
- Bed prep: Elmers glue on glass
Great looking owl, good job!
Re: Owl Facing Left 2.4x scale
Posted: Fri Jan 10, 2014 12:08 am
by Eaglezsoar
Eaglezsoar wrote:bvandiepenbos wrote:hey Eaglezsoar
yes, I have printed that owl a few times at 9" tall hollow (0 infill) worked great.
I used 3 perimeters and 4 top & bottom layers.
.2 layers
I used ABS, Steve cheated and used PLA and infill (wink, wink)
KISSlicer
That's great to know! And thanks for answering without being condescending.
I just don't see the sense in infill for a statue that just sits there, I'm glad that it can be done hollow.