Re: Checking extruder
Posted: Wed Feb 20, 2013 3:50 pm
So far I've made 3 prints. The one on the left was the first which I killed when it got so bad, the one on the right I let run to completion, then I lubed the joints and got the one in the middle [still attached to the glass build plate]. There are still infill problems, but I've got something that looks reasonable.
[img]http://www.craftgizmos.com/rostock/cube1-feb20.jpg[/img]
[img]http://www.craftgizmos.com/rostock/cube1-feb20.jpg[/img]