Checking extruder

Having a problem? Post it here and someone will be along shortly to help
Post Reply
Craftgizmos
Printmaster!
Posts: 45
Joined: Sat Nov 24, 2012 1:00 pm

Re: Checking extruder

Post by Craftgizmos »

So far I've made 3 prints. The one on the left was the first which I killed when it got so bad, the one on the right I let run to completion, then I lubed the joints and got the one in the middle [still attached to the glass build plate]. There are still infill problems, but I've got something that looks reasonable.

[img]http://www.craftgizmos.com/rostock/cube1-feb20.jpg[/img]
Top
Post Reply

Return to “Troubleshooting”