noz.temp changing

[bauf]

Hey, so when i'm doing a print at i.e. 240°c, 15-30min into the print,the nozzle temp according to the display goes down waaay much.. today it went down to 198°c from 240°c.
I have the Max V2, all stock parts. The print started out fine.. but when i went under 200°c,it started failing badly.. so how do i fix this?

[bauf]

*facepalm* Forgot about the fans.. so used to using only PLA, so when trying out ABS, i forgot about them. I guess they're the reason of the temperature drop.

[Mac The Knife]

And with ABS, the layer fan is not needed as much as it is for pla.

And if you haven't done so, wrap your hotend with Kapton tape,,, it helps a lot.