Prozacs Max Build

Prozac · Post by **Prozac** » Sat Mar 08, 2014 2:37 pm

Heres a picture of the hollow pyramid while its printing looking alot better than the other two.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0263_zpsgwqsp0p0.jpg[/img]

completed (looks like at the top it doesnt have enough time to cool)
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0266_zpsiqhezdif.jpg[/img]

Prozac · Post by **Prozac** » Sat Mar 08, 2014 6:08 pm

Have the extra bearings from where I didnt use the axle supports , so I decided to model up a better spool holder. Realized that I could have just made end caps now and save material but well see how this fits.

Model
[img]http://img.photobucket.com/albums/v129/ProZaC333/spoolspacer_zps4132a5c3.jpg[/img]

Printing, 4 hr 45 min print at 64 speedrate.
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0268_zps0exsmrm9.jpg[/img]

Prozac · Post by **Prozac** » Sun Mar 09, 2014 4:01 pm

Got the spool roller going smooth , had to sand a little for the bearings.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0269_zpsosxk2qdx.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0271_zpscpbcx5ij.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0273_zpsmrxoav0r.jpg[/img]

AndThenSome09 · Post by **AndThenSome09** » Sun Mar 09, 2014 9:35 pm

Looks like a good idea, I know mine has been printing beautifully since I switched to a spool holder with bearings!

McSlappy · Post by **McSlappy** » Sun Mar 09, 2014 9:46 pm

I think a spool holder with bearings will be my next addon, looks good!

Prozac · Post by **Prozac** » Mon Mar 17, 2014 12:58 pm

Well things got a little messy around my work area , so I took the time to clean up a little and figured while I was at it , it was time to clean this rats nest up. Heres a before and after.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0311_zpstve4yjk5.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0315_zpsge2etuk1.jpg[/img]

AndThenSome09 · Post by **AndThenSome09** » Mon Mar 17, 2014 9:54 pm

Huge difference!! Looks good to me!

Post by **Eaglezsoar** » Mon Mar 17, 2014 10:34 pm

Very nice and I like that fan you put on the door to cool the Rambo.

Prozac · Post by **Prozac** » Tue Mar 18, 2014 12:41 pm

Thanks , I decided to change up a little on the Rambo cooling , added a 80mm fan blowing on the rambo and moved the smaller one to exhaust out.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0317_zpsyk0avu0k.jpg[/img]

Post by **Eaglezsoar** » Tue Mar 18, 2014 1:38 pm

Can the door close in that configuration?

Prozac · Post by **Prozac** » Tue Mar 18, 2014 3:53 pm

Yeah perfectly and vents the hot air out through the notch. Just hot glued untill I print a mount.

Prozac · Post by **Prozac** » Tue Mar 18, 2014 9:44 pm

Well I ran another 4 wires down the extrusions for a light ring upgrade/mod to show , should have recorded was funny, I forgot to resist the 5v supply and I watched the 6 leds count down to death , lol.

Heres me testing before install.
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0323_zpskscovdcd.jpg[/img]

Face Palm (what I tested at then hook up to 5v)
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0325_zpsivnephqn.jpg[/img]

Prozac · Post by **Prozac** » Wed Mar 19, 2014 9:18 pm

Well got off work and took the time , so I woudnt forget the most important part , the resistor. So I wired 6 led 3.5v to the 5v supply on the PSU using a 39 ohm resistor. Heres some pics!

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0326_zpsdnquwlhh.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0327_zpsfrhm0kbs.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0329_zpsnkpmpoga.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0330_zps4gkj7pwu.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0331_zpsz8trgxpm.jpg[/img]

and done! Back to printing this encloser , about through with my first spool.

Post by **Eaglezsoar** » Wed Mar 19, 2014 10:02 pm

Those leds look great on there and are very functional, good job!

Prozac · Post by **Prozac** » Thu Mar 20, 2014 12:25 pm

Thanks. I just got some color in , ordered from Justpla.com because seemecnc was out of the PLA trans purple. But I got Green ABS and Trans Purple PLA Fast shipping.

Need to make a spool adapter for them , when I get off work.

Heres a Picture.
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0333_zps7pvuntgl.jpg[/img]

Post by **Eaglezsoar** » Thu Mar 20, 2014 12:35 pm

I get the JustPLA from Amazon and never had a problem with them.
Good prices too.

Prozac · Post by **Prozac** » Thu Mar 20, 2014 12:38 pm

Good to know , Im looking forward to Laying some PLA down and seeing what kind of results I get.Which reminds me I need to get this PLA Fan mounted and wired up.

Prozac · Post by **Prozac** » Thu Mar 20, 2014 11:29 pm

Well here's my first PLA print with a matching ABS I printed awhile back. Pla shifted towards the top not sure why.
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0334_zpsmbpyfzqr.jpg[/img]

Prozac · Post by **Prozac** » Mon Apr 21, 2014 5:40 pm

Well its been awhile , Ive been struggling with random layer shifting , and after tons or wasted time in denial that the extruder stepper wires and endstop had anything to do with it. Mainly after 50 hours of printing I didnt have any problems untill I change filament. But that was the problem I remove the wires from the extrusion and no more layer shifting. I now would like to stress how Noise can effect printing , I should have listened but thought I could beat it.

Little holder I made for work.
[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0420_zps7arcaw05.jpg[/img]

BTW Ive been having really good adhesion results with abs on bluetape.

Prozac · Post by **Prozac** » Tue Apr 22, 2014 9:46 pm

Well after printing some more encloser pieces I decided to take a break switch it back and try out some more justpla trans purple and print a twisted vase,heres the results. No layer fan , but the breeze in this room is tornadict, window unit and ceiling fan on low.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0428_zpsm43gjzlr.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0430_zpspywcusvg.jpg[/img]

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0431_zps13nrb634.jpg[/img]

Looking forward to some upgrades
Carbon Fiber Helm joint arms or magnetic (still researching)
mutliple extruders (more colors and support material)
The all mighty Kraken (Dreams can be great)

Prozac · Post by **Prozac** » Thu Apr 24, 2014 12:53 am

Printing another twisted vase thought I would share the current result.
[img]http://img.photobucket.com/albums/v129/ProZaC333/DSC043261_zpsa19172b1.jpg[/img]

forrie · Post by **forrie** » Thu Apr 24, 2014 4:35 am

Wow...that's fantastic

Post by **Eaglezsoar** » Thu Apr 24, 2014 9:08 am

That is a great color and a great job!

Prozac · Post by **Prozac** » Thu Apr 24, 2014 12:56 pm

Thanks guys Im glad to be printing without the noise issues. And looking much better. I decided to get the spool off the top of the max so I printed some supports and mounted above feeds great.

[img]http://img.photobucket.com/albums/v129/ProZaC333/IMAG0448_zpsv1otpwsu.jpg[/img]

Welcome to the SeeMeCNC Community

Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build

Re: Prozacs Max Build