I'm tring Nylon printing, but here in Osaka, Japan, it might be a bit humid.
Beautiful Machine!!
Beautiful Machine!!
Looks, movements, and also sounds. I like all of them!
I'm tring Nylon printing, but here in Osaka, Japan, it might be a bit humid.
I'm tring Nylon printing, but here in Osaka, Japan, it might be a bit humid.
Re: Beautiful Machine!!
Congratulations!!!
Let us know how things work out!!!
Let us know how things work out!!!
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a
http://dropc.am/p/KhiI1a
Re: Beautiful Machine!!
[youtube]http://www.youtube.com/watch?v=Y_3OWTmo7MM[/youtube]
Extrusion Temp : 245C
Heated Bed Temp : 40C
(using a glue stick and curing tape)
In the video, you can hear popping sounds.
Electric oven is useful for drying Nylon fillaments?
At the moment, I don't mind the influence so much.
Extrusion Temp : 245C
Heated Bed Temp : 40C
(using a glue stick and curing tape)
In the video, you can hear popping sounds.
Electric oven is useful for drying Nylon fillaments?
At the moment, I don't mind the influence so much.
Last edited by sushiyaki on Sun Jul 28, 2013 4:52 pm, edited 2 times in total.
-
Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7159
- Joined: Sun Apr 01, 2012 5:26 pm
Re: Beautiful Machine!!
A very nice machine!
Good job building and getting it calibrated.
Please be careful running with an Extrusion Temp : 245C
You are in the danger zone of melting the Peek plastic on your hot end.
Thanks for posting the great pictures.
Good job building and getting it calibrated.
Please be careful running with an Extrusion Temp : 245C
You are in the danger zone of melting the Peek plastic on your hot end.
Thanks for posting the great pictures.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”