Welcome to the SeeMeCNC Community

Hi all, I have a Duet Wifi V1.03 running firmware 1.19.2. I'm using the Teensy 3.2 with trash80's code. I can't get the probe to work for calibrating. It shows the probe triggered (reads 1000 on web interface) all the time. I've checked and rechecked the wiring, altered the Z probe sensitivity up ...

Tried burning the bootloader today. Completes the write but then fails on the verification. I tried to then upload firmware in case the affected area of flash isn't used. Write ends up failing. I think the board is toast.

I had tried all of those suggestions and more before posting. Today I programmed another control board (a Azteeg X3 Pro) with no issues with the file that I was trying to upload into the Rambo. I then removed the Rambo from the printer to look for any obvious issues with it but nothing. I did notice ...

Hi all, I had a search through the board but didn't find anything relevant to this problem. I've had my Rostock Max V3 running for over a year without any problems. I decided to do some upgrades. Main upgrade is to the .9 degree stepper motors. I modified the firmware in the Arduino IDE. I sent the ...