Welcome to the SeeMeCNC Community

My table warped! SeeMeCNC sent me a new one but before I got it I made one out of 1/8 aluminium plate (you also need 2 1/8" cross members. I lined up the heated bed to mark the mounting holes. I drilled and tapped these. I then got some 1/8" automotive vacuum hose and cut 0.2" lengths. I use these ...

Ok John at SeeMeCNC gave me some code that works. I made a couple changes so it work better. I can print parts. I'm using several on my 3D printer. But I still need some fine tuning. I have torun=ble with large parts; as the new layers cool they stress the lower layers and pull them off the table ...

Greetings! I have a H-1.1 kit. The mechanical assembly is complete. The electronics is connected, but I haven't been able to get firmware for the Rambo controller. Also, I can't fnd the correct stepper motor connections. I'd appreciate communicating with anyone who has build the H-1.1 with the Rambo ...