Welcome to the SeeMeCNC Community

Hello, I've been told I only get to keep one of my 3d printers so unfortunately I have to let my Rostock Max V2 go. I have done the following work to it. I'm asking $1200OBO. I have just recently calibrated the printer after adding the Print Zebra Plate. I mainly print ABS and PETG but the hotend ...

I would love to know when these are up for Sale.

Thanks.

I would love to find out also.

Yeah it's clamped down with 6 clips. I checked the adhesion but it was really good and took a bit to get the print off . I'm thinking over extrusion also. I'll try his print and sees what I get.

I have it printing pretty slow and it printed out 1inch then it kicked it and plate off. I have it set to the following... 30 mm/s infill 30 mm/s inside perimeters 30 mm/s outside Perimeter 40 mm/s Support mat (no supports in this print though) 60 mm/s bridges (no bridges) 150mm/s non print moves ...

Hello everyone! Well I have had my machine up and running since december and when printing small parts for the most part I have no issues and it looks good, but I have recently tried to print a part that about 8 inches square and up to about 4 inches high or so and somewhere between 12-24 hours into ...

Yeah I just confirmed with them it's a bug. Very frustrating. I have since exported my settings so I at least have them if it happens again which i'm pretty sure it will.

Anyone else having issue with profiles just going blank? Meaning the profile name for the quality stays but all the settings disappear?

I have been having this problem and can't seem to figure out why it's happening.

Any ideas?

thanks I appreciate it.

Hi all, I'm running some overhand tests and finding the side I have my layer fan on is curling way less. So my thought is to try the 360 degree shroud here http://repables.com/r/436/ or I'm thinking about adding 1-2 more fans. I guess the question I have isn't so much how to print the shrouds but ...

I'll have to check into that gauge. I'll admit I'm not 100% sure how use it. I'll have to do some research. Now that I have the nozzle fixed i'm running some calibration prints.

Thanks Russ,

i'm glad i'm not crazy. I ended up ordering 3 nozzles and they should arrive today.......Going through withdrawl.

Then I need to figure out why my nozzle was dragging on the prints.....eek.

Yeah I bought 2 .5 nozzles and a .35 nozzle. I won't be caught with just 1 again. I just wanted to be sure my thought process appeared to be correct. I have done some searching about the .35 nozzle but can't figure out if it will cause me more trouble than it worth or if worth going that small for ...

Hi all, So I was trying to calibrate my extruder and made the mistake of changing the mm/step on the towers causing my nozzle to hit the paper on top of my glass. Not realizing I changed the wrong setting in the eeprom. I think I have it corrected now but it caused the nozzle to hit fairly hard and ...

I cannot thank you enough. I finally got it work. I don't know if I read it wrong or if it wasn't clear but I feel soooo much better.

Thanks!!

Well that explains my stupidity. Thanks very much. That explains a lot.

OK so then here is the question. If i adjust the horizontal axis will I immediately see a change in the center bed macro? Or only once I adjust the towers?

Maybe i'm expecting the change to soon.

this would explain why i'm not seeing any change in the center because I haven't touched the towers.

Ok well "Yay!" got the printer built and everything is working and no smoke. I'm having a problem though have have tried for over 2 hours to fix and I cannot seem to figure it out. I have Set the Z height on the lcd. I have adjusted the end stops and calibrated the x, y and z. but the center just ...

Hello Everyone, I've never had a 3d but have wanted to get one for years and finally took my first step. I received my new Rostock Max V2 kit last week and have started to work on it. With any luck think should be done by this weekend at which point i'll have to dive into the software assuming I don ...