Welcome to the SeeMeCNC Community

Hey guys, I've bought an E3Dv6 and, rather than replacing the stock hot end which still works great, I'd like to run both simultaneously. I know the E3Dv6 requires a different firmware setting though, and I can't find an existing dual mount system for both (only two stock hot-ends, or two E3Dv6s ...

Welcome to the Forum! A lot of users who had your problem used a 24V 20A or 30A to power the heated bed. You would also need a 25 or 40 amp DC-DC SSR to control the 24V. Ebay has the power supplies. The heating bed output from the Rambo goes to the input of the DC-DC SSR and the output of the SSR ...

Hey, I've built a Rostock Max v1 and calibrated it. I'm pretty happy with the surface levelling, but the heated bed only reaches 60 degrees because the power supply SeeMeCNC provided is too weak; so ABS has trouble sticking to it. I'm using 3M "3D printing tape" and hairspray on a glass plate to try ...