Welcome to the SeeMeCNC Community

Super Manual! A few things that I have learned since putting mine together: My extruder motor ran very hot, had to follow this post for it to cool down, "stepper motors are super hot!" (http://forum.seemecnc.com/viewtopic.php?f=77&t=6024). Might be a good side note to include in the manual. On page ...

Guys, So I built my V2 over Christmas break with the kids. Went through 300 meters of ABS without a problem printing tons of things. I just started trying to use PLA and have had a whole host of issues - mostly with temps and jamming. My biggest problem with PLA is jams. Seems like many of my ...

Straight glass with glue stick. 75C Works every time. Started printing with this trim line this weekend and really like the stuff. Seems very strong, a bit flexible and has great layer adherence. The only problem I am having is bed adhesion. I have printed the same object 12+ times with a variety ...

I have an issue with Repetier-Host where the manual Z axis control will go up closer to the end stops, but will not go down. It will print ok, but the manual -z control doesn't work right...

I am no expert but saw this article and thought it might help give some ideas.

http://formlabs.com/en/company/blog/201 ... ted-parts/

As a follow up, I also put the G-code into the Mattercontrol, Slicer Settings, Printer, Custom G-Code settings so now it does automatically turn on and off when my print job starts and finishes! Thanks!

I read that at times the LEDs can flicker when connected to the PEEK fan power so I thought it might work better running on it's own circuit. The Gcode for turning the light on and off is great. I setup two Macro Buttons so it only takes a click to turn them on and off. Not quite the 'automatic ...

I just built my Rostock last week and have been truly impressed with the printer and with the amazing build manual!! During the build I noticed the Fan 1 connector on the Terminal Block was not being used. I ran an extra 26ga wire through the Y axis tower, hooked it up to the Fan 1 connector and had ...

I have not done this modification yet, have you noticed it running any different/better with the fans? Thanks!

I am about to pull the trigger on one of these rigs and am very excited about it. One thing that it looks like I will need to order that does not look to be include is some ABS filament. I could not find it in chapter 1 or 2. It might be silly but I would be sad to get to the point of starting my ...