Welcome to the SeeMeCNC Community

So I'm running a Rostock V2 with and E3d v6. I recently installed a second 30mm squirrel cage layer fan (two layer fans total). During the process I accidentally knocked out my thermistor quick-connect plug at the hot end, enough that the signal was lost, but I pushed it back together and it seemed ...

Thanks for the input guys, I definitely have a layer fan, I wouldn't PLA without it. I'll try upping the Z-lift when I get a chance, and hope that this is partially the crappy filament. I just cant seem to find the right settings to work with layer heights under .2mm yet (haven't really got there on ...

So I'm about a month and a half into printing on my V2( E3D v6 hotend, .4mm nozzle, TrickLaser CF arms), and I've had great results with ABS so far. I started using PLA this week, and I'm using the Hollow Pyramid to get a feel for it. After about 4 or 5 unsuccessful attempts( which I attribute ...

So I'm about a month and a half into printing on my Rostock V2( E3D v6 hotend .4mm nozzle, TrickLaser CF arms), and I've had great results with ABS so far. I started using PLA this week, and as I did with ABS, used the Hollow Pyramid to get a feel for it. After about 4 or 5 unsuccessful attempts ...