# generated by Slic3r 1.1.7 on Fri Feb 27 16:53:41 2015
avoid_crossing_perimeters = 0
bed_size = 150,150
bed_temperature = 90
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 4
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 3
dont_support_bridges = 0
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed temperature\nG91\nG1 Z10 E-5. F18000\nG90\nM120 S4 P5\nG4 P80\nM120 S4 P5\nG4 P1000\nG28 ; home X axis\nM84     ; disable motors\n; BEGINNING OF PRINT FINISHED TONES\nM117 PRINT FINISHED\nM120 S6 P10\nG4 P40\nM117 WAIT UNTIL COOL\nG4 P40\nM120 S6 P10\nG4 P40\nM120 S6 P10\nG4 P40\nM120 S6 P10\nG4 P40\nM120 S6 P10\nG4 P40\n; END OF PRINT FINISHED TONES
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.45
fan_always_on = 1
fan_below_layer_time = 1
filament_diameter = 1.85
fill_angle = 45
fill_density = 10%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 90
first_layer_extrusion_width = 0.6
first_layer_height = 0.35
first_layer_speed = 15
first_layer_temperature = 227
g0 = 0
gap_fill_speed = 30
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_speed = 30
interface_shells = 0
layer_gcode = 
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 0
min_print_speed = 8
min_skirt_length = 0
notes = 
nozzle_diameter = 0.5
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 30
perimeters = 1
post_process = 
print_center = 0,0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 5.4
retract_length_toolchange = 10
retract_lift = 0.2
retract_restart_extra = 0.1
retract_restart_extra_toolchange = 0
retract_speed = 100
seam_position = random
skirt_distance = 4
skirt_height = 1
skirts = 4
slowdown_below_layer_time = 45
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0.45
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = M120 S4 P5\nG4 P80\nM120 S4 P5\nG4 P1000\nG28\nM104 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\n; BEGINNING OF HEAD MOVEMENT WARNING TONES\nM120 S4 P5\nG4 P40\nM120 S4 P5\nG4 P40\nM120 S4 P5\nG4 P40\nM120 S4 P5\nG4 P40\nM120 S4 P25\nG4 P5000\nM120 S4 P5\nG4 P40\nM120 S4 P5\nG4 P40\nM117 KEEP HANDS AWAY\nG4 S3\n; END OF HEAD WARNING TONES
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.45
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear-grid
support_material_spacing = 1.8
support_material_speed = 30
support_material_threshold = 30
temperature = 229
thin_walls = 1
threads = 5
toolchange_gcode = 
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
top_solid_layers = 5
travel_speed = 200
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0